Plate Makers

F10 Plate Maker

Connect your PC through the USB port, take your vector based artwork and directly engrave on multiple sizes of plates. These sizes are held in place by registration pins, ensuring quick changes of plates are easy. The F10 utilizes a powerful 10 watt fiber laser head with advanced KENT control software that allows for DEAD-ON engraving. Solid prints are produced at up to 250 lpi and half-tone 4 color process images up to 175 lpi.

F20 Plate Maker

The F20 printing plate laser was designed specifically for laser engraving pad printing laser plates and is easy to link up to a computer through the USB plug. The F20 laser has a powerful 20 watt fiber laser head and advanced KENT VR.01 control software that will allow the customer to set-up graphics very fast and produce high quality eco-friendly printing plates. The F20 laser has a precise “DEAD-ON” engraving platform that matches the KENT backing plates. The F20 laser will also allow the customer to engrave multiple images per plate at different times also reducing plate cost. By using the F20 laser you will eliminate the need for film positives, etching chemicals such as alcohol and hazardous etching acids. You will be able to produce solid prints up to 250 lpi and half-tone 4 color process images up to 175 lpi. The F10 laser will save you time, labor and space.

Capture_edited_edited.png

EXU-250

The EXU-250 exposure unit was built specifically for exposing photo-polymer and thin-steel printing plates for pad printing machines. The small compact bench top unit has a clamping system with sponged back to ensure proper pressure between film, printing plate and glass. The unit has four black light bulbs that are evenly spaced to ensure even light exposure. The unit also has a simple dial count down timer that can be set up to 12 minutes. The dial has an indicator light that shows when the exposing lamps are on or off.

Plate Exposure Unit
Capture.PNG

UV600-BLV

The UV600-BLV exposure unit was built specifically for exposing photo polymer and thin-steel printing plates for pad printing machines. The small compact bench-top unit has an internal vacuum pump with an on/off switch mounted on the front control panel. Our exposure unit also has a digital lamp timer and on/off switch that are also mounted on the front control panel. The unit has three black light bulbs with a light reflector mounted directly behind them to ensure even light exposure. The printing plate along with the film positive are placed directly on the ridged plate vacuum area. The ridges will allow for proper vacuum pressure when the CREE film frame is placed over the printing plate.

Dead-On Light Box

Features:

  • Accurate Film Registration For Dead-On Plate Making

  • Built-In Registration Marks

  • Easy-to-Operate

Specifications:

  • Plate Size Options: 100x250mm, 150x300mm, 150x350mm

  • Size (LxWxH): 11x18x5

  • Voltage: 220V   50/60Hz

  • Weight: 5kg. / 11lb

Capture_edited.png

Find the Literature and more info on our Downloadable files page